Knowledge of industrial profile

Rumah Berita

Knowledge of industrial profile

Knowledge of industrial profile
May 30,2024
  1. Production standards, industrial aluminum profiles produced by legitimate manufacturers all comply with the European production standard ISO9001 quality management system.
  2. 90% of the standard industrial aluminum profile raw materials on the market are 6063-75. 6063 refers to the license plate of aluminum alloy, 775 is the classification mark for heat treatment, and it is artificially aged after cooling at the forming temperature.

  3. The standard slot width for industrial aluminum profiles is divided into slots 6, 8, and 10, which need to be selected according to your installation needs. It should be noted that interior accessories must be selected according to the slot width of the profile, otherwise there may be situations where the accessories cannot be inserted or fall off after being inserted.
  4. The material standard size produced by aluminum profile manufacturers on the market is 6.02 meters, so it can be cut freely within 6 meters. If you want a length of more than 6 meters, you need to produce it regularly.

  5. The cutting tolerance of most manufacturers on the market is plus or minus 0.5 millimeters.
  6. Cutting loss. Manufacturers who value quality usually cut a knife at both ends of the material before cutting, in order to ensure the verticality and flatness of the cutting surface. The cut material head, tail, and aluminum wire produced during cutting are commonly referred to as cutting losses

tinggalkan pesanan

tinggalkan pesanan
Jika anda berminat dengan produk kami dan ingin mengetahui butiran lanjut, sila tinggalkan mesej di sini, kami akan membalas anda secepat mungkin.



Tentang kita